Frame for 2017 Audi RS7
No.
Part # / Description / Price
Price
1
Frame Side Member Assembly 
Audi
Audi Positions: Left
Description: Listed under Audi part number 4G0-805-115-TB, this Frame Side Member Assembly carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Every genuine Audi part is validated against the same specification as the original equipment component. Confirm fitment against your vehicle identification number before ordering.
MSRP $2,599.98
$1,973.39
MSRP $2,599.98
$1,973.39
1
Frame Side Member Assembly Audi
Audi Positions: Right
Description: This factory Audi Frame Side Member Assembly (4G0-805-116-TB) carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $2,596.66
$1,970.86
MSRP $2,596.66
$1,970.86
2
Frame Side Member Audi
Audi Positions: Left
Notes: PARTS: Part included with sidemember assembly.
Description: To 1/18/15. From 1/19/15. This factory Audi Frame Side Member (4G0-802-755-TB) carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Confirm fitment against your vehicle identification number before ordering.
MSRP $524.98
$398.46
MSRP $524.98
$398.46
2
Frame Side Member Audi
Audi Positions: Right
Notes: PARTS: Part included with sidemember assembly.
Description: To 1/18/15. Genuine Audi Frame Side Member 4G0-802-756-TB. This original equipment component carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $524.98
$398.46
MSRP $524.98
$398.46
3
Frame Side Member Audi
Audi Positions: Left
Notes: PARTS: Part included with sidemember assembly.
Description: Audi part number 4G0-803-103-A, the factory Frame Side Member, carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $965.37
$793.77
MSRP $965.37
$793.77
3
Frame Side Member Audi
Audi Positions: Right
Notes: PARTS: Part included with sidemember assembly.
Description: This genuine Audi Frame Side Member, part number 4G0-803-104-A, carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Every genuine Audi part is validated against the same specification as the original equipment component. Fitment varies by model year, trim, and option content, so verify before ordering.
4
Frame Side Member Reinforcement Audi
Audi Positions: Left
Notes: PARTS: Part included with sidemember assembly.
Description: Rail reinf. Listed under Audi part number 4G0-804-029-B, this Frame Side Member Reinforcement carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $243.32
$186.14
MSRP $243.32
$186.14
4
Frame Side Member Reinforcement Audi
Audi Positions: Right
Notes: PARTS: Part included with sidemember assembly.
Description: Rail reinf. Audi part number 4G0-804-030-B, the factory Frame Side Member Reinforcement, carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $248.32
$189.96
MSRP $248.32
$189.96
5
Fender Closing Plate Audi
Audi Positions: Left
Notes: PARTS: Part included with sidemember assembly.
Description: Genuine Audi Fender Closing Plate 4G0-803-107-TA. This original equipment component forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Confirm fitment against your vehicle identification number before ordering.
MSRP $194.98
$149.16
MSRP $194.98
$149.16
5
Fender Closing Plate Audi
Audi Positions: Right
Notes: PARTS: Part included with sidemember assembly.
Description: This genuine Audi Fender Closing Plate, part number 4G0-803-108-TA, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.
MSRP $196.65
$150.44
MSRP $196.65
$150.44
6
Fender Apron Assembly Audi
Audi Positions: Left
Notes: PARTS: Part included with sidemember assembly.
Description: Audi part number 4G0-805-139, the factory Fender Apron Assembly, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $1,011.52
$831.72
MSRP $1,011.52
$831.72
6
Fender Apron Assembly Audi
Audi Positions: Right
Notes: PARTS: Part included with sidemember assembly.
Description: This factory Audi Fender Apron Assembly (4G0-805-140) forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Confirm fitment against your vehicle identification number before ordering.
MSRP $999.98
$822.24
MSRP $999.98
$822.24
7
Suspension Strut Tower Audi
Audi Positions: Left
Notes: PARTS: Part included with sidemember assembly.
Description: A7, S7, RS7. Left. This factory Audi Suspension Strut Tower (4G0-803-443-TA) controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $773.06
$635.65
MSRP $773.06
$635.65
7
Suspension Strut Tower Audi
Audi Positions: Right
Notes: PARTS: Part included with sidemember assembly.
Description: A7, S7, RS7. Right. This genuine Audi Suspension Strut Tower, part number 4G0-803-444-TA, controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Every genuine Audi part is validated against the same specification as the original equipment component. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $791.67
$600.88
MSRP $791.67
$600.88
8
Fender Filler Panel Audi
Audi Positions: Left
Description: The original equipment Audi Fender Filler Panel supplied under part number 4G0-805-239-A forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $344.48
$263.53
MSRP $344.48
$263.53
8
Fender Filler Panel Audi
Audi Positions: Right
Description: This genuine Audi Fender Filler Panel, part number 4G0-805-240-A, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Every genuine Audi part is validated against the same specification as the original equipment component. Confirm fitment against your vehicle identification number before ordering.
MSRP $361.66
$276.68
MSRP $361.66
$276.68
9
Fender Rail Reinforcement Audi
Audi Positions: Left
Notes: PARTS: Part included with sidemember assembly.
Description: Reinf plate. The original equipment Audi Fender Rail Reinforcement supplied under part number 4G0-805-361-A forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $162.49
$123.32
MSRP $162.49
$123.32
9
Fender Rail Reinforcement Audi
Audi Positions: Right
Notes: PARTS: Part included with sidemember assembly.
Description: Reinf plate. This factory Audi Fender Rail Reinforcement (4G0-805-362-A) forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Confirm fitment against your vehicle identification number before ordering.
MSRP $124.99
$94.86
MSRP $124.99
$94.86
9
Body A-Pillar Reinforcement Plate Audi
Audi Positions: Front left
Description: Apron reinf. This factory Audi Body A-Pillar Reinforcement Plate (4G0-803-135-A) carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $75.15
$60.38
MSRP $75.15
$60.38
10
Sound Absorber Audi
Audi Positions: Left
Notes: PARTS: Part included with sidemember assembly.
Description: Audi part number 4G0-810-889, the factory Sound Absorber, finishes an interior surface and hides the structure, wiring, and hardware behind it, while also carrying mounting provisions for switches, lighting, and adjacent trim pieces. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $51.98
$34.80
MSRP $51.98
$34.80
10
Sound Absorber Audi
Audi Positions: Right
Notes: PARTS: Part included with sidemember assembly.
Description: This genuine Audi Sound Absorber, part number 4G0-810-890, finishes an interior surface and hides the structure, wiring, and hardware behind it, while also carrying mounting provisions for switches, lighting, and adjacent trim pieces. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $51.38
$34.40
MSRP $51.38
$34.40
11
Fender Apron Extension Audi
Audi Positions: Left
Notes: PARTS: Part included with sidemember assembly.
Description: This genuine Audi Fender Apron Extension, part number 4G0-805-263-TB, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $262.48
$200.80
MSRP $262.48
$200.80
11
Fender Apron Extension Audi
Audi Positions: Right
Notes: PARTS: Part included with sidemember assembly.
Description: Audi part number 4G0-805-264-TB, the factory Fender Apron Extension, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $204.98
$156.81
MSRP $204.98
$156.81
12
Body A-Pillar Reinforcement Audi
Audi Description: From 09/24/2011. From 7/21/14, from 7/21/14. This factory Audi Body A-Pillar Reinforcement (4G0-806-391-B) carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Confirm fitment against your vehicle identification number before ordering.
MSRP $93.32
$70.83
MSRP $93.32
$70.83
13
Instrument Panel Air Duct Rivet Audi
Audi Description: Audi part number 7L6-868-307, the factory Instrument Panel Air Duct Rivet, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $4.89
$3.32
MSRP $4.89
$3.32
14
Suspension Strut Brace Audi
Audi Description: From 8/11. This genuine Audi Suspension Strut Brace, part number 4G0-805-645-C, controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $441.65
$335.21
MSRP $441.65
$335.21
15
Suspension Stabilizer Bar Bracket Bolt Audi
Audi Description: This factory Audi Suspension Stabilizer Bar Bracket Bolt (N-106-447-01) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $4.86
$3.30
MSRP $4.86
$3.30
16
Cowl Extension Seal Audi
Audi Positions: Left
Description: Audi part number 4G0-805-233-A, the factory Cowl Extension Seal, creates the sealing interface between two components, and because a seal is the cheapest part in most assemblies but the most common source of leaks, using the correct specification is what keeps the repair permanent. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $18.27
$12.42
MSRP $18.27
$12.42
16
Cowl Extension Seal Audi
Audi Positions: Right
Description: Audi part number 4G0-805-234-A, the factory Cowl Extension Seal, creates the sealing interface between two components, and because a seal is the cheapest part in most assemblies but the most common source of leaks, using the correct specification is what keeps the repair permanent. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $19.47
$13.23
MSRP $19.47
$13.23
17
Trunk Trim Panel Clip Audi
Audi Positions: Left
Description: The original equipment Audi Trunk Trim Panel Clip supplied under part number 4B0-863-907-A-01C is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Confirm fitment against your vehicle identification number before ordering.
MSRP $6.15
$4.19
MSRP $6.15
$4.19
18
Fender Closing Plate Audi
Audi Positions: Right
Notes: PARTS: Part included with sidemember assembly.
Description: Listed under Audi part number 4G0-802-118-C, this Fender Closing Plate forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $279.99
$214.19
MSRP $279.99
$214.19
18
Fender Closing Plate Audi
Audi Positions: Left
Notes: PARTS: Part included with sidemember assembly.
Description: Audi part number 4G0-802-127-C, the factory Fender Closing Plate, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Confirm fitment against your vehicle identification number before ordering.
MSRP $276.65
$211.64
MSRP $276.65
$211.64
19
Fender Closing Plate Bracket Audi
Audi Positions: Right
Description: Listed under Audi part number 4G0-805-479-A, this Fender Closing Plate Bracket is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $19.12
$13.00
MSRP $19.12
$13.00
20
Fender Reinforcement Bar Audi
Audi Positions: Left
Notes: PARTS: Part included with sidemember assembly.
Description: The original equipment Audi Fender Reinforcement Bar supplied under part number 4G0-805-275-D forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $173.32
$132.59
MSRP $173.32
$132.59
20
Fender Reinforcement Bar Audi
Audi Positions: Right
Notes: PARTS: Part included with sidemember assembly.
Description: Listed under Audi part number 4G0-805-276-D, this Fender Reinforcement Bar forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $173.32
$132.59
MSRP $173.32
$132.59
21
Body A-Pillar Audi
Audi Positions: Left
Notes: PARTS: Part included with sidemember assembly.
Description: This factory Audi Body A-Pillar (4G0-802-125-TA) carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Fitment varies by model year, trim, and option content, so verify before ordering.
21
Body A-Pillar Audi
Audi Positions: Right
Notes: PARTS: Part included with sidemember assembly.
Description: This factory Audi Body A-Pillar (4G0-802-126-TA) carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Every genuine Audi part is validated against the same specification as the original equipment component. Confirm fitment against your vehicle identification number before ordering.
22
Body A-Pillar Reinforcement Plate Audi
Audi Positions: Right
Notes: PARTS: Part included with sidemember assembly.
Description: Apron reinf. Genuine Audi Body A-Pillar Reinforcement Plate 4G0-805-086-A. This original equipment component carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $75.15
$60.38
MSRP $75.15
$60.38
23
Frame Rail End Audi
Audi Positions: Left
Notes: PARTS: Service part for sectioning rail end.
Description: Listed under Audi part number 4G0-803-351, this Frame Rail End carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Confirm fitment against your vehicle identification number before ordering.
MSRP $346.67
$265.20
MSRP $346.67
$265.20
23
Frame Rail End Audi
Audi Positions: Right
Notes: PARTS: Service part for sectioning rail end.
Description: Listed under Audi part number 4G0-803-352, this Frame Rail End carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $308.32
$235.86
MSRP $308.32
$235.86
24
Frame Rail End Bracket Audi
Audi Positions: Left
Notes: PARTS: Part included with rail section.
Description: Audi part number 4G0-805-677-A, the factory Frame Rail End Bracket, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $94.99
$72.09
MSRP $94.99
$72.09
24
Frame Rail End Bracket Audi
Audi Positions: Right
Notes: PARTS: Part included with rail section.
Description: The original equipment Audi Frame Rail End Bracket supplied under part number 4G0-805-678-A is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $94.99
$72.09
MSRP $94.99
$72.09
24
Bumper Impact Bar Bracket Audi
Audi Positions: Left
Description: A7 with s-line pkg, S7, cover & brackets, S7. RS7. Listed under Audi part number 4G0-807-133-B, this Bumper Impact Bar Bracket is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $326.67
$249.90
MSRP $326.67
$249.90
25
Fender Protection Film, Rear Audi
Audi Positions: Left
Description: Without underbody guard. Genuine Audi Fender Protection Film, Rear 4G0-805-583. This original equipment component forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $9.02
$6.13
MSRP $9.02
$6.13
25
Fender Protection Film, Rear Audi
Audi Positions: Right
Description: Without underbody guard. Audi part number 4G0-805-584, the factory Fender Protection Film, Rear, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.
25
Fender Protection Film, Front Audi
Audi Positions: Front right
Description: With underbody guard. The original equipment Audi Fender Protection Film, Front supplied under part number 4G0-805-700 forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.
26
Fender Protection Film, Front Audi
Audi Positions: Left
Description: With underbody guard. Genuine Audi Fender Protection Film, Front 4G0-805-699. This original equipment component forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Fitment varies by model year, trim, and option content, so verify before ordering.
27
Fender Protection Film Clip Audi
Audi Positions: Left
Notes: PARTS: Part included with cover.
Description: Audi part number 4D0-821-841, the factory Fender Protection Film Clip, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $5.13
$3.48
MSRP $5.13
$3.48